Tile & Grout Cleaning

Milwaukee Area Tile & Grout Cleaning

Tile & Grout Cleaning

Ceramic tile is one of the most abused and overlooked floor and wall surfaces in the home simply because of the care involved in cleaning it. No one is anxious to relive the terrible memories of scrubbing each tile and grout line for hours with a small brush and of using those irritating, harsh, and unsafe chemicals. Most of us would rather rearrange our sock drawer.

J&S Carpet Cleaning is dedicated to helping you keep your ceramic tile and grout clean. The good news is J&S Carpet Cleaning can make short work of this task, using only earth-safe products that won’t harm your family, your pets, or this world we share.

J&S Carpet Cleaning skillfully accomplishes the proper cleaning of ceramic tile. Heating purified water to over 230 degrees, we then inject an oxygenated form of hydrogen peroxide under 800+ lbs. of pressure utilizing very specific tools and attachments. The cleaning results speak for themselves. Whether your tile is in your kitchen, bathroom, or some other area of your home, those stubborn stains, embedded bacteria, and germs don’t stand a chance. Your tile and grout will look very much as it did the day it was installed. If your tile grout requires sealing, or if you have a few pieces that are chipped or broken and need to be replaced, we can perform those repairs too.

At J&S Carpet Cleaning we are dedicated to helping you keep your home healthy, clean, and always looking its best. The solution to difficult ceramic tile and grout cleaning is just a phone call away. Trust J&S Carpet Cleaning for all those difficult and unpopular projects. You really will be glad you did.

J&S Carpet Cleaning provides a 9-step tile & grout cleaning process.

9-Step Tile & Grout Cleaning Process

Step 1: Home Entry Protection

Upon approach to your front door, our technicians will place a protective mat outside your home. Technicians will put “booties” over their shoes to prevent tracking of outside soil into your home.

Technicians will make note of all challenging areas and set your expectations as well as come up with a solution for each area. Your tile will be pre-tested to determine what type of tile it is.

We will prepare the area surrounding the tile, making sure not to disturb any carpet, hardwood floors, walls, cabinets, etc. At this point all furniture that will be cleaned under is moved.

Our technicians thoroughly sweep and or vacuum the area, maximizing the results we obtain. As in any cleaning process, dry soil removal is crucial step.

A high-quality cleaning solution will be generously applied to the entire surface of your tile. This cleaning agent penetrates the grout breaking down dirt, grease, oils and spills.

Complex and difficult areas are agitated manually with a brush and for really challenging heavy use areas, a mechanical rotating brush is employed. The entire area is then cleaned using a variety of methods depending on tile type.

The tile is thoroughly rinsed cleaning, sanitizing and balancing the pH of your tile. Leaving no sticky residue behind.

The type of sealer and application varies on what surface it is being applied to. We highly recommend sealing, however, this step is optional.

Technicians will initiate a walk through and go over results before leaving.

Tile and Grout Cleaning
Association of Wisconsin Cleaning Contractors
Carpet & Rug Institute
IICRC Certified
Top Choice Awards